Cisco Systems SPS224G4 Manual De Usuario
Ethernet Configuration Commands
sfp speed
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
163
12
sfp speed
The sfp speed Interface Configuration (Ethernet) mode command configures the
speed of an SFP Ethernet interface. Use the no form of this command to disable
sfp speed.
speed of an SFP Ethernet interface. Use the no form of this command to disable
sfp speed.
NOTE
The sfp speed command is supported in SPS2xx products.
Syntax
sfp speed {100 | 1000 | auto}
no sfp speed
Parameters
•
100 — 100 Mbps
•
1000 — 1000 Mbps
•
auto — Detects the SFP capabilities, and determines the speed as follows:
When multi speed SFP is supported, the highest speed is selected. If SFP
capability cannot be detected, 1000 Mbps is selected.
When multi speed SFP is supported, the highest speed is selected. If SFP
capability cannot be detected, 1000 Mbps is selected.
Default Configuration
The default configuration is auto.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.