Cisco Systems SPS224G4 Manual De Usuario
GVRP Commands
gvrp vlan-creation-forbid
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
185
13
User Guidelines
The following relationship must be maintained between the timers:
Leave time must be greater than or equal to three times the join time.
Leave-all time must be greater than the leave time.
Set the same GARP timer values on all Layer 2-connected devices. If the GARP
timers are set differently on Layer 2-connected devices, the GARP application will
not operate successfully.
timers are set differently on Layer 2-connected devices, the GARP application will
not operate successfully.
Example
The following example sets the leave timer for Ethernet port e6 to 900
milliseconds.
milliseconds.
Console(config)# interface ethernet e6
Console(config-if)# garp timer leave 900
gvrp vlan-creation-forbid
The gvrp vlan-creation-forbid Interface Configuration (Ethernet, port-channel)
mode command disables dynamic VLAN creation or modification. Use the no form
of this command to enable dynamic VLAN creation or modification.
mode command disables dynamic VLAN creation or modification. Use the no form
of this command to enable dynamic VLAN creation or modification.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Default Configuration
Dynamic VLAN creation or modification is enabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode