Cisco Systems SPS224G4 Manual De Usuario
1
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
18
Introduction
Overview
This document describes the Command Line Interface (CLI) used to manage the
Linksys SPS208G, SPS224G4, and SPS2024 switches. Unless noted otherwise,
all of the CLI commands in this document apply to all three switches.
Linksys SPS208G, SPS224G4, and SPS2024 switches. Unless noted otherwise,
all of the CLI commands in this document apply to all three switches.
This chapter describes the CLI command modes, how to access the CLI, and the
CLI command editing features.
CLI command editing features.
CLI Command Modes
For greater ease of use, the Command Line Interface (CLI) is divided into four
command modes arranged hierarchically by privilege level. The command modes
are (in the order in which they are accessed):
command modes arranged hierarchically by privilege level. The command modes
are (in the order in which they are accessed):
•
User EXEC mode (lowest privilege)
•
Privileged EXEC mode
•
Global Configuration mode
•
Interface Configuration mode (highest privilege)
Each command mode has its own unique console prompt and set of CLI
commands. Entering a question mark at the console prompt displays a list of
available commands for the current mode. Specific commands are used to switch
from one mode to another.
commands. Entering a question mark at the console prompt displays a list of
available commands for the current mode. Specific commands are used to switch
from one mode to another.