Cisco Systems SPS224G4 Manual De Usuario
IGMP Snooping Commands
show ip igmp snooping mrouter
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
201
14
Command Mode
Global configuration
Command Usage
Use this command to associate CPE VLAN to a Multicast-TV VLAN.
If an IGMP message is received on a customer port tagged with a CPE VLAN, and
there is a mapping from that CPE VLAN to a Multicast-TV VLAN, the IGMP
message is associated with the Multicast-TV VLAN.
there is a mapping from that CPE VLAN to a Multicast-TV VLAN, the IGMP
message is associated with the Multicast-TV VLAN.
Example
The following example maps an internal CPE VLAN number 4 to the Multicast TV
VLAN number 300.
VLAN number 300.
Console (config)# ip igmp snooping map cpe vlan 4 multicast-tv
vlan 300
show ip igmp snooping mrouter
The show ip igmp snooping mrouter Privileged EXEC mode command displays
information on dynamically learned Multicast device interfaces.
information on dynamically learned Multicast device interfaces.
Syntax
show ip igmp snooping mrouter [interface
vlan-id
]
Parameters
•
vlan-id
— Specifies the VLAN number.
Default Configuration
This command has no default configuration.