Cisco Systems SPS224G4 Manual De Usuario
15
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
208
IP Address Commands
ip address
The ip address Interface Configuration (VLAN) mode command sets an IP
address. Use the no form of this command to remove an IP address.
address. Use the no form of this command to remove an IP address.
Syntax
ip address
ip-address
{
mask
|
prefix-length
} [default-gateway
ip-address
]
no ip address [
ip-address
]
Parameters
•
ip-address
— Specifies the valid IP address
•
mask
— Specifies the valid network mask of the IP address.
•
prefix-length —
Specifies the number of bits that comprise the IP address
prefix. The prefix length must be preceded by a forward slash (/). (Range: 8-
30)
30)
•
default-gateway
ip-address—
Specifies the IP address of the default
gateway.
Default Configuration
No IP address is defined for interfaces.
Command Mode
Interface Configuration (VLAN) mode