Cisco Systems SPS224G4 Manual De Usuario
IP Address Commands
arp
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
214
15
arp
The arp Global Configuration mode command adds a permanent entry in the
Address Resolution Protocol (ARP) cache. Use the no form of this command to
remove an entry from the ARP cache.
Address Resolution Protocol (ARP) cache. Use the no form of this command to
remove an entry from the ARP cache.
Syntax
arp
ip_addr hw_addr
{vlan
vlan-id
}
no arp
ip_addr
{vlan
vlan-id
}
Parameters
•
ip_addr
— Valid IP address or IP alias to map to the specified MAC address.
•
hw_addr
— Valid MAC address to map to the specified IP address or IP
alias.
•
vlan-id
— Valid VLAN number.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The software uses ARP cache entries to translate 32-bit IP addresses into 48-bit
hardware addresses. Because most hosts support dynamic resolution, static ARP
cache entries do not generally have to be specified.
hardware addresses. Because most hosts support dynamic resolution, static ARP
cache entries do not generally have to be specified.