Cisco Systems SPS224G4 Manual De Usuario

show ip source-guard inactive

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

233

The show ip source-guard inactive Privileged EXEC mode command displays the 
IP source guard inactive addresses.

show ip source-guard inactive

This command has no default configuration.

Privileged EXEC mode

Since the IP source guard uses the Ternary Content Addressable Memory (TCAM) 
resources, there may be situations where IP source guard addresses are inactive 
because of lack of TCAM resources.

By default, every minute the software conducts a search for available space in the 
TCAM for the inactive IP source guard addresses. 

The ip source-guard tcam retries-freq Global Configuration mode command 
changes the frequency or disables automatic retries for TCAM space.

This command displays the inactive IP source guard addresses.

The following example displays the IP source guard inactive addresses.