Cisco Systems SPS224G4 Manual De Usuario
LACP Commands
lacp port-priority
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
236
17
Example
The following example configures the system priority to 120.
Console(config)# lacp system-priority 120
lacp port-priority
The lacp port-priority Interface Configuration (Ethernet) mode command
configures physical port priority. Use the no form of this command to return to the
default configuration.
configures physical port priority. Use the no form of this command to return to the
default configuration.
Syntax
lacp port-priority
value
no lacp port-priority
Parameters
•
value
— Specifies port priority. (Range: 1-65535)
Default Configuration
The default port priority is 1.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.