Cisco Systems SPS224G4 Manual De Usuario

police

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

280

Policy maps that contain set or trust Policy-map Class Configuration commands or 
that have ACL classifications cannot be attached to an egress interface by using 
the service-policy (Ethernet, Port-channel) Interface Configuration mode 
command.

To return to the Policy-map Configuration mode, use the exit command. To return 
to the Privileged EXEC mode, use the end command.

The following example sets the DSCP value in the packet to 56 for classes in 
policy map called ‘policy1’.

The police Policy-map Class Configuration mode command defines the policer for 
classified traffic. Use the no form of this command to remove a policer.

police 

committed-rate-bps committed-burst-byte 

[exceed-action {drop | policed-

dscp-transmit}] 

no police

•

committed-rate-bps —

 Specifies the average traffic rate (CIR) in bits per 

second (bps).

•

committed-burst-byte

 — Specifies normal burst size (CBS) in bytes.

•

drop — Indicates that when the rate is exceeded, the packet is dropped.

•

policed-dscp-transmit — Indicates that when the rate is exceeded, the 
DSCP of the packet is remarked according to the policed-DSCP map as 
configured by the qos map policed-dscp Global Configuration mode 
command.