Cisco Systems SPS224G4 Manual De Usuario
QoS Commands
qos wrr-queue threshold
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
294
23
no qos wrr-queue threshold tengigabitethernet
queue-id
Parameters
•
gigabitethernet — Indicates that the thresholds are to be applied to Gigabit
Ethernet ports.
Ethernet ports.
•
tengigabitethernet — Indicates that the thresholds are to be applied to 10
Gigabit Ethernet ports.
Gigabit Ethernet ports.
•
queue-id
— Specifies the queue number to which the threshold is assigned.
•
threshold-percentage0,1,2 —
Specifies the queue threshold percentage
value. Each value is separated by a space. (Range: 0-100)
Default Configuration
80 percent for all thresholds.
Command Mode
Global Configuration mode.
User Guidelines
The packet refers to a certain threshold by the conformance level. If threshold 0 is
exceeded, packets with the corresponding DP are dropped until the threshold is
no longer exceeded. However, packets assigned to threshold 1 or 2 continue to be
queued and sent as long as the second or third threshold is not exceeded.
exceeded, packets with the corresponding DP are dropped until the threshold is
no longer exceeded. However, packets assigned to threshold 1 or 2 continue to be
queued and sent as long as the second or third threshold is not exceeded.
Example
The following example assigns a threshold of 80 percent to WRR queue 1.
Console (config)# qos wrr-queue threshold gigabitethernet 1 80