Cisco Systems SPS224G4 Manual De Usuario
QoS Commands
qos map dscp-dp
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
297
23
Example
The following example maps DSCP values 33, 40 and 41 to queue 1.
Console(config)# qos map dscp-queue 33 40 41 to 1
qos map dscp-dp
The qos map dscp-dp Global Configuration mode command maps the DSCP to
Drop Precedence. Use the no form of this command to restore the default
configuration.
Drop Precedence. Use the no form of this command to restore the default
configuration.
Advanced mode only.
Syntax
qos map dscp-dp
dscp-list
to
dp
no qos map dscp-dp [
dscp-list
]
Parameters
•
dscp-list
— Specifies up to 8 DSCP values, with each value separated by
space. (Range: 0-63)
•
dp
— Enters the Drop Precedence value to which the DSCP values
corresponds. (Range: 0-2, where 2 is the highest Drop Precedence)
In Cheetah based products
•
dp
— Enters the Drop Precedence value to which the DSCP values
corresponds. Possible values are 0 - 1 (Where 1 is the highest Drop
Precedence). (Range: 0-1)
Precedence). (Range: 0-1)
Default Configuration
All the DSCPs are mapped to Drop Precedence 0.