Cisco Systems SPS224G4 Manual De Usuario

QoS Commands

qos cos

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

300

Default Configuration

qos trust is enabled on each port when the system is in basic mode.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures Ethernet port e15 to the default trust state.

Console(config)# interface ethernet e15

Console(config-if) qos trust

qos cos

The qos cos Interface Configuration (Ethernet, port-channel) mode command
defines the default CoS value of a port. Use the no form of this command to restore
the default configuration.

Syntax

qos cos

default-cos

no qos cos

Parameters

•

default-cos —

Specifies the default CoS value of the port. (Range: 0-7)