Cisco Systems SPS224G4 Manual De Usuario

snmp-server engineID local

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

346

The snmp-server engineID local Global Configuration mode command specifies 
the Simple Network Management Protocol (SNMP) engineID on the local device. 
Use the no form of this command to remove the configured engine ID.

snmp-server engineID local {

engineid-string 

| default}

no snmp-server engineID local

•

engineid-string —

 Specifies a character string that identifies the engine ID. 

(Range: 5-32 characters)

•

default — The engine ID is created automatically based on the device MAC 
address.

The engine ID is not configured.

If SNMPv3 is enabled using this command, and the default is specified, the default 
engine ID is defined per standard as:

•

First 4 octets — first bit = 1, the rest is IANA Enterprise number = 674.

•

Fifth octet — set to 3 to indicate the MAC address that follows.

•

Last 6 octets — MAC address of the device.

Global Configuration mode