Cisco Systems SPS224G4 Manual De Usuario

snmp-server set

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide

352

The snmp-server set Global Configuration mode command defines the SNMP MIB 
value.

snmp-server set 

variable-name name1 value1 

[

 name2 value2 

…]

•

variable-name

 — MIB variable name (Range 1-160 characters).

•

name value

 — List of name and value pairs. In the case of scalar MIBs, only a 

single pair of name values. In the case of an entry in a table, at least one pair 
of name and value followed by one or more fields (Range 1-160 characters).

This command has no default configuration.

Global Configuration mode

Although the CLI can set any required configuration, there might be a situation 
where a SNMP user sets a MIB variable that does not have an equivalent 
command. In order to generate configuration files that support those situations, the 
snmp-server set command is used.

This command is case-sensitive.

The following example configures the scalar MIB sysName with the value LinkSys.