Cisco Systems SPS224G4 Manual De Usuario
Spanning Tree Commands
spanning-tree pathcost method
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
376
28
Command Modes
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables shared spanning-tree on Ethernet port e5.
Console(config)# interface ethernet e15
Console(config-if)# spanning-tree link-type shared
spanning-tree pathcost method
The spanning-tree pathcost method Global Configuration mode command sets
the default path cost method. Use the no form of this command to return to the
default configuration.
the default path cost method. Use the no form of this command to return to the
default configuration.
Syntax
spanning-tree pathcost method {long | short}
no spanning-tree pathcost method
Parameters
•
long — Specifies port path costs with a range of 1-200,000,000.
•
short — Specifies port path costs with a range of 0-65,535.
Default Configuration
Short path cost method.