Cisco Systems SPS224G4 Manual De Usuario
31
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
436
System Management Commands
ping
The ping User EXEC mode command sends ICMP echo request packets to
another node on the network.
another node on the network.
Syntax
ping {
ip-address
|
hostname
}[size
packet_size
] [count
packet_count
] [timeout
time_out
]
Parameters
•
ip-address
— IP address to ping.
•
hostname —
Host name to ping. (Range: 1-158 characters)
•
packet_size
— Number of bytes in a packet. The actual packet size is eight
bytes larger than the specified size specified because the device adds
header information. (Range: 56-1472 bytes)
header information. (Range: 56-1472 bytes)
•
packet_count
— Number of packets to send. If 0 is entered, it pings until
stopped. (Range: 0-65535 packets)
•
time_out
— Timeout in milliseconds to wait for each reply. (Range: 50-
65535 milliseconds)
Default Configuration
Default packet size is 56 bytes.
Default number of packets to send is.
Default timeout value is 2000 milliseconds.