Cisco Systems SPS224G4 Manual De Usuario
System Management Commands
show system
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
452
31
The following table describes significant fields shown above.
show system
The show system Privileged EXEC mode command displays system information.
Syntax
show system [unit
unit
]
Parameters
•
unit
— Specifies the number of the unit. (Range: 1-8)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Field
Description
Connection
Connection number
Host
Remote host to which the device is connected
through a Telnet session.
through a Telnet session.
Address
IP address of the remote host.
Port
Telnet TCP port number
Byte
Number of unread bytes for the user to see on the
connection.
connection.