Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. SPS224G4
  5. Manual De Usuario

Cisco Systems SPS224G4 Manual De Usuario

Descargar
Página de 552
VLAN Commands
switchport trunk native vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
491
34
 
•
remove
 vlan-list —
 List of VLAN IDs to be removed. Separate 
nonconsecutive VLAN IDs with a comma and no spaces. A hyphen 
designates a range of IDs.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example adds VLANs 1, 2, 5 to 6 to the allowed list.
console(config-if)# switchport trunk allowed vlan add 1-2,5-6
switchport trunk native vlan
The switchport trunk native vlan Interface Configuration mode command defines 
the native VLAN when the interface is in trunk mode. Use the no form of this 
command to restore the default configuration.
Syntax
switchport trunk native vlan
 vlan-id
no switchport trunk native vlan
Parameters
•
vlan-id—
 Specifies the ID of the native VLAN.