Cisco Systems SPS224G4 Manual De Usuario
802.1x Commands
dot1x radius-attributes vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
537
36
Port security cannot be enabled on a port if multiple hosts mode is disabled, or if
multiple hosts with authentication per host mode is enabled.
multiple hosts with authentication per host mode is enabled.
It is recommended to enable reauthentication when working in ‘multiple sessions
(multiple-hosts authentication)’, in order to detect ‘user logout’ for users who have
not yet sent ‘logoff’.
(multiple-hosts authentication)’, in order to detect ‘user logout’ for users who have
not yet sent ‘logoff’.
Example
The following command enables multiple hosts (clients) on an 802.1x-authorized
port.
port.
Console(config)# interface ethernet e16
Console(config-if)# dot1x multiple-hosts
dot1x radius-attributes vlan
Use the dot1x radius-attributes vlan interface configuration command, to enable
user-based VLAN assignment. Use the no form of this command to disable user-
based VLAN assignment.
user-based VLAN assignment. Use the no form of this command to disable user-
based VLAN assignment.
Syntax
dot1x radius-attributes vlan
no dot1x radius-attributes vlan
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Interface configuration (Ethernet)