Cisco Systems SPS224G4 Manual De Usuario
802.1x Commands
show dot1x advanced
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
545
36
It is not recommended to delete authenticated MAC addresses. Reauthentication
must be enabled when working in this mode.
must be enabled when working in this mode.
When the device sends a MAC address as the 802.1x user name or password to a
RADIUS server, the characters “:” and “-” are not forwarded to the Radius server.
Avoid defining the corresponding MAC address with “:” and “-” in the RADIUS
server.
RADIUS server, the characters “:” and “-” are not forwarded to the Radius server.
Avoid defining the corresponding MAC address with “:” and “-” in the RADIUS
server.
Example
The following example enable authentication based on the station’s MAC address.
Use the no form of this command to disable MAC authentication.
Use the no form of this command to disable MAC authentication.
Console# configure
Console(config)# interface ethernet e1
Console(config-if)# dot1x mac-authentication
show dot1x advanced
The show dot1x advanced Privileged EXEC mode command displays 802.1x
advanced features for the device or specified interface.
advanced features for the device or specified interface.
Syntax
show dot1x advanced [ethernet
interface
]
Parameters
•
interface —
Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode