Cisco Systems SPS224G4 Manual De Usuario
ACL Commands
service-policy
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
60
3
service-policy
Apply a policy map to the input of a particular interface. Use no form in order to
detach policy map from interface.
detach policy map from interface.
The command is available in Advanced mode only.
Syntax
service-policy input policy-map-name
no service-policy input
Parameters
•
input — Use input policy-map-name to apply the specified policy-map to
the input interface.
the input interface.
•
policy-map-name — Up to 32 characters.
Default Configuration
This command has no default configuration.
Command Mode
Interface configuration (Ethernet, VLAN, Port-Channel)
User Guidelines
Only one policy map per interface per direction is supported.
service-acl
To control access to an interface, use the service-acl command in interface
configuration mode. To remove the access control, use the no form of this
command.
configuration mode. To remove the access control, use the no form of this
command.