Cisco Systems SPS224G4 Manual De Usuario
ARP Inspection Commands
ip arp inspection list create
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
68
4
Example
The following example perform specific checks for dynamic Address Resolution
Protocol (ARP) inspection.
Protocol (ARP) inspection.
Console(config)# ip arp inspection validate
ip arp inspection list create
The ip arp inspection list create Global Configuration mode command creates a
static ARP binding list and to enter the ARP list configuration mode. To delete the
list, use the no form of this command.
static ARP binding list and to enter the ARP list configuration mode. To delete the
list, use the no form of this command.
Syntax
ip arp inspection list create
name
no ip arp inspection list create
name
Parameters
•
name
— Specifies the list name. (Range: 1-32 characters)
Default Configuration
No static ARP binding list exists.
Command Mode
Global Configuration mode
User Guidelines
This command enables static ARP inspection on a VLAN.