Cisco Systems SPS224G4 Manual De Usuario
5
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
75
Address Table Commands
bridge address
The bridge address Interface Configuration (VLAN) mode command adds a MAC-
layer station source address to the bridge table. To delete the MAC address, use
the no form of this command.
layer station source address to the bridge table. To delete the MAC address, use
the no form of this command.
Syntax
bridge address mac-address {ethernet interface | port-channel
port-channel-number} [permanent | delete-on-reset | delete-on-
timeout | secure]
no bridge address [mac-address]
Parameters
•
mac-address
— A valid MAC address.
•
interface—
A valid Ethernet port.
•
port-channel-number
— A valid port-channel number.
•
permanent — The address can only be deleted by the no bridge address
command.
command.
•
delete-on-reset — The address is deleted after reset.
•
delete-on-timeout — The address is deleted after “age out” time has
expired.
expired.
•
secure — The address is deleted after the port changes mode to unlock
learning (no port security command). This parameter is only available when
the port is in the learning locked mode.
learning (no port security command). This parameter is only available when
the port is in the learning locked mode.