Cisco Systems N3KC3064TFAL3 Manual De Usuario
Verifying Traffic Storm Control Configuration
To display traffic storm control configuration information, perform one of these tasks:
Purpose
Command
Displays the traffic storm control configuration for
the interfaces.
the interfaces.
Traffic storm control uses a 10-microsecond
interval that can affect the operation of traffic
storm control.
interval that can affect the operation of traffic
storm control.
Note
switch# show interface [ethernet slot/port |
port-channel number] counters storm-control
port-channel number] counters storm-control
Displays the traffic storm control configuration.
switch# show running-config interface
Traffic Storm Control Example Configuration
The following example shows how to configure traffic storm control:
switch#
configure terminal
switch(config)#
interface ethernet 1/4
switch(config-if)#
storm-control broadcast level 40
switch(config-if)#
storm-control multicast level 40
switch(config-if)#
storm-control unicast level 40
Default Traffic Storm Settings
The following table lists the default settings for traffic storm control parameters.
Table 12: Default Traffic Storm Control Parameters
Default
Parameters
Disabled
Traffic storm control
100
Threshold percentage
Cisco Nexus 3000 NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U3(1)
146
OL-26590-01
Configuring Traffic Storm Control
Verifying Traffic Storm Control Configuration