Cisco Systems N3KC3064TFAL3 Manual De Usuario
Procedure
Purpose
Command or Action
Enters configuration mode.
config t
Example:
switch#
config t
switch(config)#
Step 1
Specifies the interval for the interface to
recover from the err-disabled state. The range
recover from the err-disabled state. The range
errdisable recovery interval interval
Example:
switch(config)#
errdisable recovery
interval 32
switch(config-if)#
switch(config-if)#
Step 2
is from 30 to 65535 seconds. The default is
300 seconds.
300 seconds.
Displays information about err-disabled
interfaces.
interfaces.
show interface status err-disabled
Example:
switch(config)#
show interface status
err-disabled
Step 3
(Optional) Copies the running configuration
to the startup configuration.
to the startup configuration.
copy running-config startup-config
Example:
switch(config)#
copy running-config
startup-config
Step 4
This example shows how to enable err-disabled recovery under all conditions:
switch(config)#
errdisable recovery cause all
switch(config)#
Configuring the Debounce Timer
This feature is not supported on the Nexus 3000 product.
Configuring the Description Parameter
To provide textual interface descriptions for the Ethernet ports, perform this task:
Procedure
Purpose
Command or Action
Enters configuration mode.
switch# configure terminal
Step 1
Enters interface configuration mode for the
specified interface.
specified interface.
switch(config)# interface type slot/port
Step 2
Cisco Nexus 3000 NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U3(1)
20
OL-26590-01
Configuring Ethernet Interfaces
Configuring the Debounce Timer