Cisco Systems N3KC3064TFAL3 Manual De Usuario
Purpose
Command or Action
Sets the access mode of the interface to the
specified VLAN.
specified VLAN.
switch(config-if)# switchport access vlan
vlan-id
vlan-id
Step 3
This example shows how to configure an Ethernet interface to join VLAN 5:
switch#
configure terminal
switch(config)#
interface ethernet 1/13
switch(config-if)#
switchport access vlan 5
Configuring a VLAN as a Routed SVI
You can configure a VLAN to be a routed switch virtual interface (SVI).
Before You Begin
• Install the Layer 3 license. For more information, see License and Copyright Information for Cisco
NX-OS Software available at the following URL:
.
• Make sure you understand the guidelines and limitations of this feature. For information, see
Procedure
Purpose
Command or Action
Enters global configuration mode.
configure terminal
Step 1
Enables the creation of SVIs.
feature interface-vlan
Step 2
Creates a VLAN interface (SVI) and enters
interface configuration mode.
interface configuration mode.
interface-vlan vlan-id
Step 3
Copies the running configuration to the startup
configuration.
configuration.
copy running-config startup-config
Step 4
The following example shows how to configure a VLAN as a routed SVI:
switch#
configure terminal
switch(config)#
feature interface-vlan
switch(config)#
interface vlan 5
switch(config-if)#
copy running-config startup-config
switch(config-if)#
The following example shows how to remove the routed SVI function from a VLAN:
switch#
configure terminal
switch(config)#
no interface vlan 5
switch(config-if)#
copy running-config startup-config
switch(config-if)#
Cisco Nexus 3000 NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U3(1)
OL-26590-01
33
Configuring VLANs
Configuring a VLAN as a Routed SVI