Cisco Systems SFS 3012 Manual De Usuario
46
Replacing Blower Trays
The Topspin 360 fan tray is hot-swappable. You do not need to turn off power to the chassis to replace
the fan tray. Access the fan tray from the front of the Topspin 360 chassis.
the fan tray. Access the fan tray from the front of the Topspin 360 chassis.
Installing a Blower Tray
To insert a blower tray, perform the following steps:
1. If a blanking panel is already attached to the module bay, remove it.
2. Insert the blower tray into an open slot until it is fully seated.
1. If a blanking panel is already attached to the module bay, remove it.
2. Insert the blower tray into an open slot until it is fully seated.