Cisco Systems SG50028PK9NA Manual De Usuario

UDLD Operation

Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 

147

 

All connected devices must support UDLD for the protocol to successfully detect 
unidirectional links. If only the local device supports UDLD, it is not possible for the 
device to detect the status of the link. In this case, the status of the link is set to 
undetermined. The user can configure whether ports in the undetermined state 
are shut down or merely trigger notifications.

Under the UDLD protocol, ports are assigned the following states:

•

Detection—System is attempting to determine whether the link is 
bidirectional or unidirectional. This is a temporary state.

•

Bidirectional—Traffic sent by a local device is known to be received by its 
neighbor, and traffic from the neighbor is received by the local device.

•

Shutdown—The link is unidirectional. Traffic sent by a local device is 
received by its neighbor, but traffic from the neighbor is not received by the 
local device. 

•

Undetermined—The system cannot determine the state of the port, 
because of one of the following is occurring:

-

The neighbor does not support UDLD.

or

-

The neighbor does not receive traffic from the local device.

The UDLD action in this case depends on the UDLD mode of the device as 
explained below.

UDLD supports the following modes of operation: 

•

-

If the link is unidirectional, the port is shut down.

-

If the link is undetermined, the port is not shut down. Its status is 
changed to undetermined and a notification is sent.

•

If the link is unidirectional or undetermined, the port is shut down.