Cisco Systems SG50028PK9NA Manual De Usuario
VLAN Management
Defining VLAN Membership
202
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
13
-
Customer—Selecting this option places the interface in QinQ mode. This
enables you to use your own VLAN arrangements (PVID) across the
provider network. The device is in Q-in-Q mode when it has one or more
customer ports. See
enables you to use your own VLAN arrangements (PVID) across the
provider network. The device is in Q-in-Q mode when it has one or more
customer ports. See
.
•
Administrative PVID—Enter the Port VLAN ID (PVID) of the VLAN to which
incoming untagged and priority tagged frames are classified. The possible
values are 1 to 4094.
incoming untagged and priority tagged frames are classified. The possible
values are 1 to 4094.
•
Frame Type—Select the type of frame that the interface can receive.
Frames that are not of the configured frame type are discarded at ingress.
These frame types are only available in General mode. Possible values are:
Frames that are not of the configured frame type are discarded at ingress.
These frame types are only available in General mode. Possible values are:
-
Admit All—The interface accepts all types of frames: untagged frames,
tagged frames, and priority tagged frames.
tagged frames, and priority tagged frames.
-
Admit Tagged Only—The interface accepts only tagged frames.
-
Admit Untagged Only—The interface accepts only untagged and
priority frames.
priority frames.
•
Ingress Filtering—(Available only in General mode) Select to enable ingress
filtering. When an interface is ingress filtering enabled, the interface discards
all incoming frames that are classified as VLANs of which the interface is not
a member. Ingress filtering can be disabled or enabled on general ports. It is
always enabled on access ports and trunk ports.
filtering. When an interface is ingress filtering enabled, the interface discards
all incoming frames that are classified as VLANs of which the interface is not
a member. Ingress filtering can be disabled or enabled on general ports. It is
always enabled on access ports and trunk ports.
STEP 5
Click Apply. The parameters are written to the Running Configuration file.
Defining VLAN Membership
The Port to VLAN and Port VLAN Membership pages display the VLAN
memberships of the ports in various presentations. You can use them to add or
remove memberships to or from the VLANs.
memberships of the ports in various presentations. You can use them to add or
remove memberships to or from the VLANs.
When a port is forbidden default VLAN membership, that port is not allowed
membership in any other VLAN. An internal VID of 4095 is assigned to the port.
membership in any other VLAN. An internal VID of 4095 is assigned to the port.
To forward the packets properly, intermediate VLAN-aware devices that carry
VLAN traffic along the path between end nodes must either be manually
configured or must dynamically learn the VLANs and their port memberships from
Generic VLAN Registration Protocol (GVRP).
VLAN traffic along the path between end nodes must either be manually
configured or must dynamically learn the VLANs and their port memberships from
Generic VLAN Registration Protocol (GVRP).