Cisco Systems SG50028PK9NA Manual De Usuario

GVRP Settings

Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 

205

 

•

LAG—If interface selected is Port, displays the LAG in which it is a member.

Select a port, and click the Join VLAN button.

Enter the values for the following fields:

•

Interface—Select a Port or LAG. Select the Unit/Slot on a 500 Series 
device.

•

Mode—Displays the port VLAN mode that was selected in the Interface 
Settings page. 

•

Select VLAN—To associate a port with a VLAN(s), move the VLAN ID(s) from 
the left list to the right list by using the arrow buttons. The default VLAN might 
appear in the right list if it is tagged, but it cannot be selected.

•

Tagging—Select one of the following tagging/PVID options:

-

Tagged—Select whether the port is tagged. This is not relevant for 
Access ports.

-

Untagged—Select whether port is untagged. This is not relevant for 
Access ports.

-

PVID—Port PVID is set to this VLAN. If the interface is in access mode or 
trunk mode, the device automatically makes the interface an untagged 
member of the VLAN. If the interface is in general mode, you must 
manually configure VLAN membership. 

Click Apply. The settings are modified and written to the Running Configuration 
file.

To see the administrative and operational VLANs on an interface, click Details.

Adjacent VLAN-aware devices can exchange VLAN information with each other 
by using the Generic VLAN Registration Protocol (GVRP). GVRP is based on the 
Generic Attribute Registration Protocol (GARP) and propagates VLAN information 
throughout a bridged network.

Since GVRP requires support for tagging, the port must be configured in Trunk or 
General mode.