Cisco Systems SG50028PK9NA Manual De Usuario

Download/Backup Configuration/Log

Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 

43

 

•

Active Image Version Number—Displays the firmware version of the active 
image.

•

Active Image After Reboot—Displays the image that is active after reboot.

•

Active Image Version Number After Reboot—Displays the firmware 
version of the active image as it be after reboot.

Select the image from the Active Image After Reboot menu to identify the 
firmware image that is used as the active image after the device is rebooted. The 
Active Image Version Number After Reboot displays the firmware version of the 
active image that is used after the device is rebooted. 

Click Apply. The active image selection is updated.

The Download/Backup Configuration/Log page enables:

•

Backing up configuration files or logs from the device to an external device. 

•

Restoring configuration files from an external device to the device.

If the device is working in stacking mode, the configuration files are taken from the 
master unit.

When restoring a configuration file to the Running Configuration, the imported file 
adds any configuration commands that did not exist in the old file and overwrites 
any parameter values in the existing configuration commands. 

When restoring a configuration file to the Startup Configuration or a backup 
configuration file, the new file replaces the previous file.

When restoring to Startup Configuration, the device must be rebooted for the 
restored Startup Configuration to be used as the Running Configuration. You can 
reboot the device by using the process described in the 

section.

When restoring configuration files from an external device to the device, the 
following compatibility issues might arise: