Cisco Systems C3850NM210G Manual De Usuario
1-10
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-02
Chapter 1 Product Overview
Front Panel
SYST LED
For information on the SYST LED colors during POST, see the
.
XPS LED
Note
The XPS 2200 is not supported in this release.
For information about the XPS 2200, see the Cisco eXpandable Power System 2200 Hardware
Installation Guide on Cisco.com:
Installation Guide on Cisco.com:
Table 1-3
SYST LED
Color
System Status
Off
System is not powered on.
Green
System is operating normally.
Blinking Green
Switch is running POST.
Blinking Amber
There is a fault with one of the following:
•
Network module (non-traffic-related)
•
Power supply
•
Fan module
Amber
System is receiving power but is not functioning
properly.
properly.
Table 1-4
XPS LED
Color
XPS Status
Off
XPS cable is not installed.
Switch is in StackPower mode.
Switch is in StackPower mode.
Green
XPS is connected and ready to provide back-up power.
Blinking green
XPS is connected but is unavailable because it is providing power to another device
(redundancy has been allocated to a neighboring device).
(redundancy has been allocated to a neighboring device).
Amber
The XPS is in standby mode or in a fault condition. See the XPS 2200
documentation for information about the standby mode and fault conditions.
documentation for information about the standby mode and fault conditions.
Blinking amber
The power supply in a switch has failed, and the XPS is providing power to that
switch (redundancy has been allocated to this device).
switch (redundancy has been allocated to this device).