Cisco Systems C3850NM210G Manual De Usuario
1-21
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-02
Chapter 1 Product Overview
Rear Panel
The power supply modules have two status LEDs.
For information about replacing a power supply module, wiring a DC power supply module, and module
specifications, see
specifications, see
Fan Modules
The switch has three internal hot-swappable 12-V fan modules. The air circulation system consists of
the fan modules and the power supply modules. The airflow patterns vary depending on the power supply
configuration.
the fan modules and the power supply modules. The airflow patterns vary depending on the power supply
configuration.
shows the airflow patterns for the 24- and 48-port switches. The blue arrow shows cool air
flow, and the red arrow shows warm air flow. When the fan modules are operating properly, a green LED
is on at the top left corner of the fan assembly (viewed from the rear). If the fan fails, the LED turns to
amber. The switch can operate with two operational fans, but the failed fan should be replaced as soon
as possible to avoid a service interruption due to a second fan fault.
is on at the top left corner of the fan assembly (viewed from the rear). If the fan fails, the LED turns to
amber. The switch can operate with two operational fans, but the failed fan should be replaced as soon
as possible to avoid a service interruption due to a second fan fault.
Note
Three fans are required for proper cooling.
Table 1-16
Switch Power Supply Module LEDs
AC-Power Supply Module LEDs
AC OK
Description
PS OK
Description
Off
No AC input power.
Off
Output is disabled, or input is
outside operating range (AC LED
is off).
outside operating range (AC LED
is off).
Green
AC input power present.
Green
Power output to switch active.
Red
Output has failed.
DC-Power Supply Module LEDs
DC OK
Description
PS OK
Description
Off
No DC input power.
Off
Output is disabled, or input is
outside operating range (DC LED
is off).
outside operating range (DC LED
is off).
Green
DC input power present.
Green
Power output to switch active.
Red
Output has failed.