Cisco Systems C3850NM210G Manual De Usuario
2-11
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-02
Chapter 2 Switch Installation
Installing the Switch
StackPower Partitioning Examples
and
show StackPower stacks of Catalyst 3850 switches with failover conditions.
In
, the StackPower cable 2 is faulty. Therefore, this stack does not provide redundancy.
Figure 2-9
Example of a StackPower Stack with a Failover Condition
In
, StackPower port B on the center switch has failed and this stack partitions into two
stacks. The top two switches share power, and the bottom switch is now a separate stack.
Figure 2-10
Example of a Partitioned StackPower Stack with a Failover Condition
Installing the Switch
•
•
•
The illustrations shown in this section show the Catalyst 3850-48 PoE+ switch as an example. You can
install other Catalyst 3850 switches following the same procedures.
install other Catalyst 3850 switches following the same procedures.
344188
1
3
2
344189
1
2