Cisco Systems C3850NM210G Manual De Usuario
3-8
Catalyst 3850 Switch Hardware Installation Guide
OL-26779-02
Chapter 3 Installing a Network Module
Configuring a Network Module
C3850-NM-2-10G module
The first two parts are natively 1G ports and the last two ports are natively 10G ports. So you configure
the 1G posts as GigabitEthernet1/1/1 through GigabitEthernet1/1/2, and configure the last two ports as
TenGigabitEthernet1/1/3 through TenGigabitEthernet1/1/4, even when you are operating the last two
ports as 1G. There are only four interfaces which are valid and the other four should not be used even
though they still show up in the CLI.
the 1G posts as GigabitEthernet1/1/1 through GigabitEthernet1/1/2, and configure the last two ports as
TenGigabitEthernet1/1/3 through TenGigabitEthernet1/1/4, even when you are operating the last two
ports as 1G. There are only four interfaces which are valid and the other four should not be used even
though they still show up in the CLI.
Supported GBICs
Interface
Action
GigabitEthernet1/1/1
Configure this interface
GigabitEthernet1/1/2
Configure this interface
GigabitEthernet1/1/3
Disregard
GigabitEthernet1/1/4
Disregard
TenGigabitEthernet1/1/1
Disregard
TenGigabitEthernet1/1/2
Disregard
TenGigabitEthernet1/1/3
Configure this interface, even when operating as 1G
TenGigabitEthernet1/1/4
Configure this interface, even when operating as 1G
TenGigabitEthernet:
GigabitEthenet
•
SFP-H10GB-CU1M
•
SFP-H10GB-CU3M
•
SFP-H10GB-CU5M
•
SFP-10G-SR
•
SFP-10G-LRM
•
SFP-10G-LR
•
SFP-10G-ER
•
GLC-T (10/100/1000)
•
GLC-SX-MM
•
GLC-LH-SM
•
GLC-SX-MMD
•
GLC-LH-SMD
•
GLC-ZX-SM
•
GLC-ZX-SMD
•
GLC-BX-D
•
GLC-BX-U
•
CWDM SFP
•
SFP-GE-S
•
SFP-GE-L
•
SFP-GE-Z
•
DWDM SFP
•
DWDM SFP (add.)