Cisco Systems SLM2008RF Manual De Usuario
3
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
5
Connecting the Cisco SLM2008 Switch
This chapter will guide you through the hardware installation for the Cisco
SLM2008 8-Port Gigabit Smart Switch with PD and AC Power. The following
sections are included:
SLM2008 8-Port Gigabit Smart Switch with PD and AC Power. The following
sections are included:
•
•
Placement Options
When you choose a location for the switch, observe the following guidelines:
•
Make sure that the switch is accessible and that the cables can be easily
connected.
connected.
•
Keep cabling away from sources of electrical noise, power lines, and
fluorescent lighting fixtures.
fluorescent lighting fixtures.
•
Position the switch away from water and moisture sources.
•
To ensure adequate air flow around the switch, be sure to provide a
minimum clearance of two inches (50 mm).
minimum clearance of two inches (50 mm).
•
Do not stack free-standing switches more than four units high.
Desktop Option
For desktop acement, set the Cisco SLM2008 switch horizontally on a surface so
that it sits on its four rubber feet.
that it sits on its four rubber feet.