Cisco Systems Topspin 360 Manual De Usuario

4

1. Determine the end of the Server Switch to position at the front of the rack.
2. Install the rack ears using the screws provided. 

Figure 2-1: Install the Rack Ears on the Chassis 

1. Separate the sliding piece from the main shelf unit. 

Note the way that the pieces fit together. The flanges face outward. 
The right bracket is engraved with an EXR, and the left bracket is engraved with an EXL. 

Figure 2-2: Separate the Sliding Bracket From Both Sides of the Shelf Unit

2. Attach the wide bracket pieces to the rear rack posts (opposite from the side with which you want to 

align the switch).