Cisco Systems N3KC3064TQ10GT Manual De Usuario
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
1-8
Cisco Nexus 3000 Series Hardware Installation Guide
OL-25338-04
Chapter 1 Overview of the Cisco Nexus 3000 Series Switches
Cisco Nexus 3048 Switch
Figure 1-4
Rear View of the Cisco Nexus 3048 Switch
Ports for the Cisco Nexus 3048 Switch
The Cisco Nexus 3048 switch chassis includes the following ports:
•
10/100/1000 Ethernet downlink ports (48 ports)
•
1- and 10-Gigabit Ethernet uplink ports
•
100/1000 Ethernet management ports (2 ports)
•
Console port (1 port)
•
USB port (1 port)
The chassis has 48 10/100/1000 Ethernet downlink ports that you connect to servers, which are often in
the same rack or a nearby rack. You use RJ-45 connectors with copper cables to connect the switch to
the servers. The ports are numbered from left to right from 1 to 48 with the odd-numbered ports on top
and the even-numbered ports on the bottom.
the same rack or a nearby rack. You use RJ-45 connectors with copper cables to connect the switch to
the servers. The ports are numbered from left to right from 1 to 48 with the odd-numbered ports on top
and the even-numbered ports on the bottom.
You use up to four 1- and 10-Gigabit Ethernet uplink ports to connect the switch to one to four hosts or
switches. You use an SFP or SFP+ transceiver for each of these ports.
switches. You use an SFP or SFP+ transceiver for each of these ports.
Two 100/1000 Ethernet management ports enable you to manage switch operations. You can connect to
the switch through these two ports by using an RJ-45 connector on a copper cable.
the switch through these two ports by using an RJ-45 connector on a copper cable.
One console port enables you to initially configure the switch and to perform troubleshooting operations.
You use an RJ-45 connector with a copper cable to connect to this port.
You use an RJ-45 connector with a copper cable to connect to this port.
One USB port enables you to save or load switch configurations.
1
ID and Status LEDs
3
1- and 10-Gigabit Ethernet uplink ports (4)
2
10/100/1000 Ethernet downlink ports (48)
4
Grounding pad