Cisco Systems 200 Manual De Usuario

Configuring VLAN Interface Settings

175

Cisco Small Business 200 Series Smart Switch Administration Guide 

To create a range of VLANs, select the Range radio button, and specify the range 
of VLANs to be created by entering the Starting VID and Ending VID, inclusive. 
When using the Range function, the maximum number of VLANs you can create at 
one time is 100.

Click Apply to create the VLAN(s).

The Interface Settings page

 

displays and enables configuration of VLAN-related 

parameters for all interfaces.

To configure the VLAN settings:

Click VLAN Management > Interface Settings.

Select an interface type (Port or LAG), and click Go. Ports or LAGs and their VLAN 
parameters are displayed.

To configure a Port or LAG, select it and click Edit.

Enter the values for the following fields:

•

Interface—Select a Port/LAG. 

•

Interface VLAN Mode—Select the interface mode for the VLAN. The 
options are:

-

General—The interface can support all functions as defined in the 
IEEE 802.1q specification. The interface can be a tagged or untagged 
member of one or more VLANs.

-

Access—The interface is an untagged member of a single VLAN. A port 
configured in this mode is known as an access port.

-

Trunk—The interface is an untagged member of one VLAN at most, and 
is a tagged member of zero or more VLANs. A port configured in this 
mode is known as a trunk port.

-

Customer—Selecting this option places the interface in QinQ mode. This 
enables you to use your own VLAN arrangements (PVID) across the 
provider network. The device is in Q-in-Q mode when it has one or more 
customer ports. See 

.