Cisco Systems 200 Manual De Usuario

Adding IP Multicast Group Addresses

Cisco Small Business 200 Series Smart Switch Administration Guide 

212

 

To configure and display the registration for the interfaces within the group, select 
an address, and click Details.

The page contains:

•

VLAN ID—The VLAN ID of the Multicast group.

•

MAC Group Address—The MAC address of the group.

Select the port or LAG to be displayed from the Filter: Interface Type menu.

Click Go to display the port or LAG membership.

Select the way that each interface is associated with the Multicast group: 

•

Static—Attaches the interface to the Multicast group as a static member. 

•

Dynamic—Indicates that the interface was added to the Multicast group as 
a result of IGMP/MLD snooping.

•

Forbidden—Specifies that this port is not allowed to join this group on this 
VLAN.

•

None—Specifies that the port is not currently a member of this Multicast 
group on this VLAN.

Click Apply, and the Running Configuration file is updated.

Entries that were created in the IP Multicast Group Address page 

cannot be deleted in this page (even if they are selected).

The IP Multicast Group Address page

 

is similar to the MAC Group Address page

 

except that Multicast groups are identified by IP addresses. 

The IP Multicast Group Address page enables querying and adding IP Multicast 
groups.