Cisco Systems 2960S Manual De Usuario

The stacking-capable switch models support stacking with the optional stack kit. It has the FlexStack 
module (hot-swappable) to insert in the slot in the switch rear panel, and a 0.5-meter FlexStack cable to 
connect the FlexStack module ports. 

For FlexStack module installation, see 

. For stack 

cabling, see 

Use only approved cables, and connect only to other Catalyst 2960-S switches. Equipment might be 
damaged if connected to other nonapproved Cisco cables or equipment.

RPS is not supported on the Catalyst 2960S-F48FPS-L, 2960S-F48LPS-L, 2960S-F24PS-L, 
2960S-F48TS-L, 2960S-F24TS-L, 2960S-F48TS-S, and 2960S-F24TS-S switches.

The Cisco RPS 2300 (model PWR-RPS2300) supports the Catalyst 2960-S switch.

Attach only the following Cisco RPS model to the RPS receptacle: RPS2300. Statement 370

Connect the switch and the redundant power system to different AC power sources.

Use this cable for the RPS: CAB-RPS2300-E.

The Cisco RPS 2300 is a redundant power system that can support six external network devices and 
provide power to one or two failed devices at a time. It senses when the internal power supply of a 
connected device fails and provides power to the failed device, preventing loss of network traffic. For 
information, see the 

 section.

Fan exhaust

AC power connector

RATING

100-240~

12-6A, 50-60Hz

3

44242