Cisco Systems 2960S Manual De Usuario
C-2
Catalyst 2960-S Switch Hardware Installation Guide
OL-19732-04
Appendix C Configuring the Switch with the CLI-Based Setup Program
Accessing the CLI Through the Console Port
Connecting the RJ-45 Console Port or USB Console Port
Step 1
If you are connecting the switch USB console port to a Windows-based PC for the first time, install the
USB driver according to these instructions. See
USB driver according to these instructions. See
•
•
•
Note
If you do not want to use the switch USB console port, you can use an RJ-45-to-DB-9 adapter cable to
connect the switch RJ-45 console port to a PC or terminal port.
connect the switch RJ-45 console port to a PC or terminal port.
Figure C-1
Connecting the USB Console Cable to the Catalyst 2960-S Switch
Step 2
Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC
application such as HyperTerminal or ProcommPlus, makes communication between the switch and
your PC or terminal possible.
application such as HyperTerminal or ProcommPlus, makes communication between the switch and
your PC or terminal possible.
1
USB console port (5-pin mini-Type B)
2
USB Type A to 5-pin mini-Type B cable
3
USB Type A connection on laptop
Catalyst 2960-S
Series
11X
2X
1X
23X
24X
25X
26X
49
51
50
52
47X
48X
POWER
OVER ETHERNET 740W
37X
39X
36X
38X
11X
14X
12X
13X
253216
3
2
2
1
1