LOEWE 37 Manual De Usuario

39 -

Operating additional equipment

The HDMI connections (High Definition Multimedia In-

terface) permit digital video and audio transmission via 

a connection cable from a player, e.g. from the Loewe 

ViewVision DVD recorder.

The digital picture and sound data are transmitted without data compres-

sion and therefore lose none of their quality.

Your TV set automatically shows 24p movies (see glossary page 60) 

output by a player connected via HDMI, e.g. Loewe BluTech Vision, in 

the original 24p format. Film quality improvement (DMM) must be set 

to on here (see page 21).
Using a DVI/HDMI adapter cable, the digital video signals of a DVI player 

can also be played via the compatible HDMI connection. The sound must 

be fed in additionally. 
HDMI and DVI both use the same copy protection method HDCP.

Connecting the device
Connect the device by an HDMI cable (type A, 19 pole) to the HDMI1/DVI 

or HDMI2/DVI socket of the TV set.

If a DVI/HDMI adapter cable is used, the appropriate sound can be fed 

in via the audio input socket AUDIO IN1 (analogue) or AUDIO DIGITAL IN 

(digital) on the TV set. See also page 43.

It is not necessary to log in HDMI devices in the connection wizard.

Call AV selection.

  

Select HDMI1/DVI or HDMI2/DVI socket, 

  OK  to switch over.
Start playback on the connected HDMI device.
The best possible format for the picture will be detected 
and set automatically.

Digital Link HD in appropriately equipped HDMI devices
As long as HDMI is selected as a memory location, all remote control  

commands which the connected HDMI unit can handle are passed on to 

it. The HDMI unit can therefore be installed in a concealed position and 

still be operated. Volume, Sound on/off, Sound adaptation and Picture 

format affect the operation of the TV set. 

Switch back to TV mode to the station last viewed with the TV button.

Switch Digital Link HD on/off temporarily: Press the TV button for a little 

longer (approx. 1 second).

TV remote switch on via Digital Link HD
In the TV menu under Connections 

→ Miscellaneous → Remote TV switch 

on via Digital Link HD you can define that the TV set switches on auto-

matically from standby when a connected HDMI device displays a menu 

or a disk is inserted.

You can connect a PC or a SetTopBox (STB) to the PC IN 
socket and thus use the screen of the TV set as an output 
device.

ž

resolutions on the PC first:

  800 x 600      60 Hz  (SVGA)  

1024 x 768  60 Hz  (XGA)

  1280 x 1024  60 Hz  (SXGA)  

1360 x 768  60 Hz  (WXGA)

ž

according to the possibilities of the SetTop-Box:

Connect the device via a VGA cable to the PC IN socket 
of the TV set (audio connection, see page 40).
A log-in in the connection wizard is unnecessary.

Call AV selection.

  Select PC IN socket, 
  OK  to switch over.

Adapting the geometry (only possible with certain signals)
This is where the picture can be properly positioned and the position of the pic-
ture (horizontal and vertical) can be moved so that it fills the entire screen. 

Call TV menu.

  Selecting and adjusting the Geometry.

Call TV menu.

 

Select Picture,

    go to the menu line below.
  Select and set colour standard:
  for 

PCs: RGB, 

  für 

STB: Ycc (rare: Ypp or RGB)

If the wrong standard is set then the colours will not be 
correctly displayed.

OK

DVD

HDMI1/DVI

AV selection

VGA

HDMI2/DVI

VIDEO

COMP. IN

VCR

OK

PC IN

AV selection

HDMI2/DVI

VIDEO

COMP. IN

AVS

HDMI1/DVI