Canton 3C16476CS Manual De Usuario

C

HAPTER

 1: I

NTRODUCING

 

THE

 B

ASELINE

 S

WITCH

The Power LED shows the power status of the Switch.

Table 7   Power LED

The unit is supplied with four self-adhesive rubber 
pads.

If the unit is to be part of a free-standing stack, apply 
the pads to each marked corner area on the 
underside of the unit. Place the unit on top of the 
lower unit, ensuring that the pads locate with the 
recesses of the lower unit.

The Switch automatically adjusts to the supply volt-
age. Only use the power cord that is supplied with 
the unit.

Use the Recovery button on the rear panel to reset 
the Switch to its factory defaults. For more informa-
tion, refer to 

 on 

.

The 3Com Baseline Switch 2250 Plus package 
includes the following items:

■

One 3Com Baseline Switch 2250 Plus unit

■

One power cord

■

Four standard height, self-adhesive rubber pads

■

One mounting kit

■

One CD-ROM, which contains this User Guide and 
the 3Com Discovery application

■

One warranty flyer

Before installing and using the Switch, verify that your 
Switch package has all these items. If any of the 
above items are damaged or missing, contact your 
3Com network supplier immediately.

Green

The unit is powered on and ready for use

Flashing 
Green

Power-on self-test is in progress

Yellow

Power-on self-test or loopback test failed. If this 
occurs, reset the Switch to factory defaults. Refer 
to 

Off

The unit is not receiving power:

■

Verify that the power cord is connected cor-
rectly

■

If the unit still does not operate, contact your 
3Com network supplier