Compaq SW3323 Manual De Usuario

The System Configuration Menu enables modification of system-level switch
configuration parameters. Select a from the Main Menu to view the System
Configuration Menu. Figure 3-4 shows the System Configuration Menu and
Table 3-3 describes the menu.

Figure 3-4    System Configuration Menu

SNMP Configuration Menu

Menu for configuring a number of SNMP-related parameters.

System Name

The administrative name given to the switch (1-36 character range).

System Location

The physical location of the switch (1-36 character range).

System Contact

The contact person for the operation of the switch (1-36 character range).

IP Address

The IP address of the switch.

Subnet Mask

The subnet mask associated with the IP address of the switch.

Default Gateway

The default gateway (or router) that the switch sends IP packets destined for a

different subnet.

BootP/DHCP Enable

Allows you to enable (Yes) or disable (No) the BootP and DHCP protocols for

automatically configuring the switch’s IP address information.

SYSTEM CONFIGURATION     Access Control:READ/WRITE

  a. SNMP Configuration Menu

  b. System Name

  c. System Location

  d. System Contact

  e. IP Address000.000.000.000

  f. Subnet Mask000.000.000.000

  g. Default Gateway000.000.000.000

  h. BootP/DHCP EnableYes

  i. Screen Timeout(minutes)5

  j. PasswordNone

  k. Terminal Baud Rate9600

  l. Terminal Hardware Flow Control No

  m. Power Up Diagnostics  Yes

  x. Previous Menu

Enter Selection: