D-Link DES-3224 Manual De Usuario
10/100 Auto Negotiation Switch User’s Guide
Installing the DES-3224
7
Desktop/ Shelf Installation
Follow these steps to install the DES-3224 on a desktop or shelf:
1. Place the four rubber pads at the four corners of the DES-3224.
2. Install the DES-3224 on the desktop/shelf where you would like to place it.
Rack Installation
The DES-3224 can be mounted in an EIA standard size, 19 inch rack. The dimensions of the
DES-3224 are 17.4 x 10.4 x 2.48 inches. The DES-3224 can be placed in a wiring closet
along with other equipment.
DES-3224 are 17.4 x 10.4 x 2.48 inches. The DES-3224 can be placed in a wiring closet
along with other equipment.
Follow these steps to install the DES-3224 on a rack:
1. Attach a mounting bracket to each side of the DES-3224 with the screws provided.
2. Slide the DES-3224 into the rack and use the screws provided to secure the DES-3224 to
the rack.
3. Connect the power cord and verify that the DES-3224 is receiving adequate power.
Power On
The power supply will adjust to the local power source automatically. The DES-3224 may be
plugged in without having any or with all LAN segment cables connected.
plugged in without having any or with all LAN segment cables connected.
The power plug is located at the rear of the DES-3224. Plug the cable into the wall socket
and plug the other end into the DES-3224. There is no on/ off switch. The DES-3224 powers
on when you plug the power cord into the three-pronged power connector. When the DES-
3224 is powered on, the Power Led will light and all ports will auto negotiate the proper
speed and duplex mode.
and plug the other end into the DES-3224. There is no on/ off switch. The DES-3224 powers
on when you plug the power cord into the three-pronged power connector. When the DES-
3224 is powered on, the Power Led will light and all ports will auto negotiate the proper
speed and duplex mode.
Reboot the DES-3224 if there is a problem. Contact D-Link Systems, Inc. for technical
support.
support.
Check the configuration of the DES-3224 after a power failure but do not reset unless it is
necessary.
necessary.
The DES-3224 can be used with power sources in the range 100 to 240 VAC., 50 to 60 Hz.