Cyclades User's Guide Manual De Usuario

Installation

89

                                 Performing Basic Network Configuration

 

 

This procedure requires a hardware connection already made between the 
KVM/net’s KVM management port and a local monitor, keyboard, and 
mouse, as described under “To Connect to the User 1 Management Port” on 
page 83. After the KVM/net and monitor are powered on, the OSD login 
screen appears.

The following table shows how to perform common actions described in the 
following procedures when working with the OSD. 

Table 2-2: OSD Equivalents for Common Actions

Press OK.

Tab to the OK button and press the Enter key on 
your keyboard.

Enter <any value>.

Type the value in the appropriate field and press 
the Enter key.

Save changes.

Tab to the Save button and press the Enter key.

Select <an option>. 

Press an arrow key to navigate. Select the menu 
option and then press the Enter key.

Go to a specific screen, as in:

“Go to ‘Configure > Users and 
Groups > Local Users > Change 
Password’.”

From the Main menu, select the first option 
shown in the menu path; “Configure” in the 
example. On the next menu, select the next option 
shown after the > (right angle bracket); “Users 
and Groups” in the example. Repeat until you 
select the last option in the menu path.

Exit the OSD.

Click the X box on the upper right of the viewer. 
If you are on the Main Menu, you can select Exit.