Cyclades User's Guide Manual De Usuario

Installing the AlterPath KVM Expander

122  

T

1. Connect the two supplied brackets to the KVM Expander, connecting one 

bracket to each side of the box.

a. Decide whether you need to mount the KVM Expander by the front or 

back and locate the appropriate sets of holes on the KVM Expander.

The following figure shows the angle of a bracket being installed for 
rack mounting.

The following figure shows the angle of a bracket being installed for 
wall mounting.

b. For each bracket, insert a screw through each of the three holes on the 

bracket into the appropriate holes at either the front or back of the 
KVM Expander. 

The following figure shows the brackets as they appear from the side 
and front of the KVM Expander after the brackets are installed for rack 
mounting.

Holes for 
back mounting

KVM Expander side

Holes for 
front mounting

Bracket

Holes for wall mounting

Bracket