Cyclades User's Guide Manual De Usuario

Web Manager for Administrators

235

                                 Configuration

 

 

If you fill in the “Source IP” field, incoming packets are filtered for the 
specified IP address. If you fill in the “Destination IP” field, outgoing packets 
are filtered for the specified IP address.

If you fill in either “Mask” field, incoming or outgoing packets are filtered for 
IP addresses from the network in the specified netmask. 

The source and destination IP and related fields are shown in the following 
figure.

You can select a protocol for filtering from the “Protocol” drop-down list, 
which is shown in the following figure.

The additional fields that appear for each protocol are explained in the 
following sections.

If you select Numeric as the protocol when specifying a rule, a text field 
appears to the right of the menu for you to enter the desired number, as shown 
in the following figure.

If you select TCP as the protocol when specifying a rule, the additional fields 
shown in the following figure appear for you to fill out at the bottom of the 
form.