Cyclades User's Guide Manual De Usuario
Management
294
AlterPath KVM/net Installation, Administration, and User’s Guide
10.Click “apply changes.”
Microcode Reset
Selecting Management>Microcode Reset in Expert mode brings up the form
shown in the following figure.
shown in the following figure.
Figure 4-50:Microcode Reset Form
You can use the form to reset the microcode after an upgrade.
T
To Reset the Microcode After Upgrade
Perform this procedure if you have upgraded microcode as described in “To
Upgrade Firmware” on page 290.
Upgrade Firmware” on page 290.
1. Go to Management>Microcode Reset in Expert mode.
The Microcode Reset form appears.